A quick one-liner which gives you an outline of your Host hardware information:

Get-VMHost |Sort Name |Get-View |
Select Name,
@{N=“Type“;E={$_.Hardware.SystemInfo.Vendor+ “ “ + $_.Hardware.SystemInfo.Model}},
@{N=“CPU“;E={“PROC:“ + $_.Hardware.CpuInfo.NumCpuPackages + “ CORES:“ + $_.Hardware.CpuInfo.NumCpuCores + “ MHZ: “ + [math]::round($_.Hardware.CpuInfo.Hz / 1000000, 0)}},
@{N=“MEM“;E={“” + [math]::round($_.Hardware.MemorySize / 1GB, 0) + “ GB“}} | Export-Csv c:\hostinfo.csv

Output Example:

A few one-liners inspired by the people who I follow on twitter, firstly Jason Boche was working on a script to reset CPU and Memory limits to “Unlimited” for all VMs in vCenter, I joked with him that this was a one liner, firstly we can set the memory limits with the following:

Get-VM | Get-VMResourceConfiguration | Where-Object {$_.MemLimitMB -ne ‘-1‘} | Set-VMResourceConfiguration -MemLimitMB $null

The –1 equates to an “Unlimited” setting.  This doesn’t address the CPU limits, this can be done using the following:

Get-VM | Get-VMResourceConfiguration | Where-Object {$_.CpuLimitMhz -ne ‘-1‘} | Set-VMResourceConfiguration -CPULimitMhz $null

Continue reading →

Ever wondered how your VM’s are doing ?  What resources are they using, do they have too many CPU’s or too much memory ?

This simple one-liner will give you a list of each of your vms, it will tell you how many cpu’s, the amount of memory, average cpu usage for x amount of days and the average memory usage for x amount of days, how cool is that ?!

Get-VM | Where {$_.PowerState -eq “PoweredOn”} | Select Name, Host, NumCpu, MemoryMB, @{N=”Cpu.UsageMhz.Average”;E={[Math]::Round((($_ |Get-Stat -Stat cpu.usagemhz.average -Start (Get-Date).AddHours(-24)-IntervalMins 5 -MaxSamples (12) |Measure-Object Value -Average).Average),2)}}, @{N=”Mem.Usage.Average”;E={[Math]::Round((($_ |Get-Stat -Stat mem.usage.average -Start (Get-Date).AddHours(-24)-IntervalMins 5 -MaxSamples (12) |Measure-Object Value -Average).Average),2)}} ` | Export-Csv c:\Temp\stats.csv

Update 03 July 2009: This has been updated as it was not collecting the average over the given timescales, the original code was selecting 1 sample from the timeframe.

Sample output:

To get VMotion working the networking setup plays a big part, any of the following could cause you big issues:

• A spelling mistake in a PortGroup name
• A missing PortGroup
• A PortGroup configured incorrectly
• A non-existing PortGroup on one of your hosts
• etc

This is why automation and PowerCLI is key to the setup of your vSwitches and PortGroup’s, you could add each vSwitch manually and then create a PortGroup for each VLAN you have trunked to your hosts manually but what are the chances you will miss one, what are the chances you will get the VLAN ID incorrect ?  And you sure do get bored of the wizard when you have 4 vSwitches and around 20 PortGroups !

The following code will take you through copying all vSwitches and PortGroups from an existing ESX server over to a new server, ensuring they are exactly the same.  It sure does save me time !

$VISRV = Connect-VIServer (Read-Host "Please enter the name of your VI SERVER")
$BASEHost = Get-VMHost -Name (Read-Host "Please enter the name of your existing server as seen in the VI Client:")
$NEWHost = Get-VMHost -Name (Read-Host "Please enter the name of the server to configure as seen in the VI Client:")

$BASEHost |Get-VirtualSwitch |Foreach {
   If (($NEWHost |Get-VirtualSwitch -Name $_.Name-ErrorAction SilentlyContinue)-eq $null){
       Write-Host "Creating Virtual Switch $($_.Name)"
       $NewSwitch = $NEWHost |New-VirtualSwitch -Name $_.Name-NumPorts $_.NumPorts-Mtu $_.Mtu
       $vSwitch = $_
    }
   $_ |Get-VirtualPortGroup |Foreach {
       If (($NEWHost |Get-VirtualPortGroup -Name $_.Name-ErrorAction SilentlyContinue)-eq $null){
           Write-Host "Creating Portgroup $($_.Name)"
           $NewPortGroup = $NEWHost |Get-VirtualSwitch -Name $vSwitch |New-VirtualPortGroup -Name $_.Name-VLanId $_.VLanID
        }
    }
}

On my previous post where we counted how many VMs were on each host and the cluster they were in I was asked a couple of questions:

1.  How about listing the number of VMs per Resource Pool?

2.  How can we extend this to get the templates as well ?

Ok, easy stuff (I thought).

Lets take them in turn…

Question 1.  How about listing the number of VMs per Resource Pool?

What you need to remember about this is that even if a VM is not in a resource pool it still has resources available to it which have to come from somewhere so in fact what VMware do behind the scenes is have a hidden resource pool called ‘Resources’ where it places the VM when it is not in any other resource pool.

If you remember this then yes, it is quite easy as below:

Get-ResourcePool | Where {$_.Name -ne “Resources“ }| Select Name, @{N=“NumVM“;E={($_ | Get-VM).Count}} | Sort Name|Export-Csv -NoTypeInformation c:\res-numvm.csv

All we needed to do was to put a Where statement in there to not count the VMs in the ‘pre-made resource pool’

Question 2. How can we extend this to get the templates as well ?

Ahhh, this one is simple I thought, all we need to do is put a count in for Get-Template so the one-liner looks like this:

Get-VMHost |Select @{N=“Cluster“;E={Get-Cluster -VMHost $_}},Name, @{N=“NumVM“;E={($_ |Get-VM).Count}}, @{N=“NumTemplates“;E={($_ |Get-Template).Count}} |Sort Cluster,Name |Export-Csv -NoTypeInformation c:\clu-host-numvm-numtempl.csv

Unfortunately as a Template is basically a special type of VM the cmdlets don’t work like this at the moment, you can not get a list of Templates which exist on a host without delving into the SDK so what I suggest you do is wait until the next version of PowerCLI is released and see if they have fixed this issue. – Current version is PowerCLI V4.0.0.1580

Isn’t it annoying when you are looking for a VM on your datastore and you cant find it because the folder name is not the same as the VM, use the below script and you will never have that problem again.

This script will compare the name of the VM to the folder it is stored in, any mismatches will be output.

I know a regex expert could probably do this better, let me know if you are one 🙂

Sample Output:

Continue reading →

Ever wondered how many VM’s you have on each Host? You could manually check it or then again you could let powershell do the work for you:

Get-VMHost | Select @{N=“Cluster“;E={Get-Cluster -VMHost $_}}, Name, @{N=“NumVM“;E={($_ | Get-VM).Count}} | Sort Cluster, Name | Export-Csv -NoTypeInformation c:\clu-host-numvm.csv

Continue reading →

Short security principles intro

One aspect of your vSphere environment that shouldn’t be ignored is the built-in security feature that allows you to control who can do what with which vSphere entity.

Internally this is controlled from the AuthorizationManager. This object contains all the properties and methods you need to configure and manage the built-in security system.

The principle how vSphere entities are protected is quite straightforward.

At the basis are the so-called privileges. Each privilege describes a basic action that can be performed on one or more of the vSphere entities.

Continue reading →